Our Coating Inspection Services offer comprehensive solutions across various domains. We dominate the Non-Destructive Examination & Testing that ensures the integrity and longevity of coatings, as well as the specialized applications like Concrete Coatings, Fireproofing (Cementitious and Intumescent), and innovative Plural Component Application. Our team excels in Foam Spraying and Powder Coating, alongside expert Duplex Systems services, including Galvanizing and Metallizing Coatings. Each service is tailored to meet the unique needs of our clients, leveraging our decades of industry experience and a commitment to quality that sets us apart. Whether you’re looking to protect new investments or extend the life of existing assets, our team is equipped to deliver unparalleled results.
At the forefront of preserving infrastructure integrity, our Non-Destructive Examination & Testing (NDE&T) services stand as a pillar of our commitment to safety and quality. Utilizing cutting-edge technologies and methodologies, we offer thorough evaluations without compromising the coating or the underlying structure. Our expertise spans across various techniques, tailored to identify potential issues before they escalate, including corrosion detection, coating thickness measurement, and bond strength evaluation. This proactive approach ensures our clients’ assets remain protected and compliant, minimizing downtime and extending the lifespan of their investments. Trust in our NDE&T services to safeguard your projects with precision and reliability.
integral to safeguarding the durability and integrity of industrial assets, our inspection of coating linings verifies thoroughly the application of high-performance linings that are designed to protect surfaces against harsh chemicals, extreme temperatures, and physical wear. From tanks and pipelines to complex structures, our inspection solutions ensure proper application for operational efficiency and longevity. Our team employs state-of-the-art tools. We are very familiar with contractor’s techniques and materials, including epoxy, polyurethane, and ceramic linings materials, to verify the optimal work for each unique application. Our expertise not only verify the correct application to ensure the life of your assets but also enhances safety and compliance, making us a trusted partner in asset preservation.
Our expertise in Concrete Coatings extends beyond surface aesthetics to deliver deep, structural protection for concrete installations. We understand the unique challenges that concrete poses, from moisture issues to chemical exposure and physical abrasion. Our inspection services will shield your needs, ensuring that the application of the designed materials enhance its life expectancy for durability and resistance against environmental stressors. Whether it’s for industrial floors, bridges, or buildings, our solutions encompass a range of applications, ensuring a seamless, robust barrier that prevents water ingress, resists chemical corrosion, and withstands heavy traffic. With meticulous verification of work preparation and application, our concrete coatings not only ensure the extend of the lifespan of concrete structures but also ensure the scheduled maintenance will not come unexpectedly, hence safeguarding your investment against time and nature.
Our Fireproofing inspection services offer advanced verification during the application of Cementitious and Intumescent coatings which are designed to significantly enhance the fire resistance of structures. Cementitious fireproofing involves the application of a thick, durable layer that acts as a barrier against heat, safeguarding the structural integrity of steel and concrete under extreme temperatures. Intumescent coatings, on the other hand, expand when exposed to fire, forming an insulating char that protects the structure from heat and flames. These innovative solutions are critical for maintaining the safety and compliance of buildings, industrial facilities, and infrastructure, ensuring they remain secure in the face of fire hazards. Our inspection service expertise ensures that each project achieves optimal protection, meeting stringent industry standards and providing peace of mind.
Our Inspection Services for the Application of paint with Plural Component Equipment harnesses the cutting-edge precision and efficiency for paint applications. This advanced method allows for the on-site mixing and application of multi-component paints with fast cure process, ensuring optimal performance characteristics and durability of the coating. By precisely controlling the ratio and mixing of components immediately before application, this equipment facilitates the application of enhanced coating materials for superior adhesion, resilience, and protection properties. Ideal for demanding environments and high-performance coatings, our expertise in plural component technology ensures the contractor utilize on proper manner this equipment, taking advantage of rapid cure times, reduced waste, and enhanced longevity for your assets. Whether tackling large-scale industrial projects or specialized applications, our team delivers customized, high-quality inspection that stand the test of time and conditions.
Our Foam Spraying inspection service ensures the highest standards of quality and efficiency in the application of foam insulation. Specializing in the oversight of spray polyurethane foam (SPF) applications, we provide comprehensive inspections that cover every phase of the process, from substrate preparation to the final application. Foam spraying offers exceptional benefits in terms of insulation, air sealing, and moisture resistance, making it a preferred choice for a wide range of industrial and commercial projects. Our expert inspectors ensure that the foam is applied consistently and correctly, achieving the desired thickness, density, and adherence to safety standards. By meticulously monitoring the application process, we guarantee optimal performance, energy efficiency, and durability of the foam coating, ensuring it meets our clients’ specific requirements and industry regulations.
Our Metallizing inspection service focuses on the critical evaluation of thermal spray coating processes, ensuring the highest quality and adherence to industry standards. Metallizing, a method of applying metallic coatings to surfaces for protection against corrosion and wear, requires precise application techniques and thorough quality control to achieve its full protective potential. Our inspection services cover the entire metallizing process, from surface preparation to the final coating application, verifying the correct material composition, coupons, equipment setup, application process, dust accumulation, application thickness, bond strength, etc. This process is essential for extending the life of structures and components exposed to harsh or corrosive environments. With our expert oversight, clients can expect enhanced durability, improved performance, and increased longevity for their assets, all while ensuring compliance with rigorous safety and performance standards.
Our Powder Coating inspection service emphasizes the critical examination of the powder coating process, from pre-treatment through to the final cure, to ensure exceptional quality and durability of the finish. Powder coating offers a superior and environmentally friendly alternative to traditional painting, providing a tougher, more resistant finish on metals and various substrates. Our rigorous inspection process assesses the evenness of the coat, adherence to the substrate, and the curing process to verify that the coating meets the highest standards of appearance and longevity. By ensuring the proper application of powder coating, we help safeguard against common issues such as chipping, fading, and scratching, extending the lifespan of the coated items. Our expertise ensures that every project achieves a flawless finish that combines aesthetic appeal with long-term protection.
FBE coating, a coating application for pipes used in harsh or corrosive environments specially for pipes installed in underground environments, provides a robust, impermeable barrier that significantly extends the life of pipelines. Our thorough inspection process verifies the uniform application and proper curing of the FBE coating, ensuring it meets strict industry standards for thickness, adhesion, and uniform application for corrosion resistance. By meticulously assessing the integrity of the FBE layer, we help prevent pipeline failures, minimize maintenance costs, and ensure the safety and reliability of these essential infrastructures. Our expertise in FBE coatings guarantees that your pipelines are protected with a durable, high-performance finish.
Our inspection services for Duplex Systems focus on the synergistic protection offered by combining galvanizing, stainless steel or another similar engineered material, with additional liquid coating layers, notably enhancing the durability and lifespan of steel structures. For instance, galvanizing, the process of applying a protective zinc coating to steel or iron, serves as the first line of defense against corrosion. When paired with liquid coating layers, this method forms a Duplex System that not only provides superior corrosion resistance but also offers aesthetic versatility and increased mechanical protection. Our meticulous inspection protocols ensure that the galvanizing base is flawlessly applied, followed by thorough checks on the adhesion, integrity, and compatibility of the subsequent coatings. This dual-layer approach significantly amplifies protection against environmental aggressors, safeguarding the structural integrity and extending the service life of assets, and creating the appealing color that match the surrounding spaces. Our expertise ensures these systems meet stringent performance criteria, delivering unparalleled protection.
In the complex world of industrial coatings, our comprehensive services are designed to address every aspect of our client’s needs, from initial consultation to the final quality assurance. Our expertise spans across Coating Consulting, where we tailor strategies to meet your specific requirements; Coating Specifications Review, ensuring a project adheres to all industry standards; Coating Failure Assessments, identifying and rectifying potential issues to prevent future problems; AMPP QP’s Endorsement guidance, assisting you in achieving recognized certifications; and Maintenance Surveys, offering ongoing support to maintain the integrity and longevity of your coatings. Each service is built on a foundation of deep industry knowledge and a commitment to excellence, ensuring that we provide solutions that not only protect your assets but also enhance their performance and durability.
Our Coating Consulting service provides clients with expert guidance through every phase of their coating projects. From initial concept to completion, we offer bespoke solutions tailored to meet the unique challenges and requirements of each project. Leveraging our extensive industry experience, we advise on the selection of coatings, application methods, and maintenance strategies that ensure optimal performance and longevity of the coated surfaces. Our consultants work closely with clients to understand their specific needs, offering insights that reduce costs, enhance efficiency, and improve outcomes. Whether you’re navigating complex environmental regulations, seeking to extend the lifespan of your assets, or aiming for sustainability goals, we are equipped with the proper knowledge to provide the strategic support you need to make informed decisions and achieve your objectives.
Our Coating Specifications Review service ensures your projects align with the highest industry standards and best practices. This critical step involves a detailed examination of your coating specifications to verify that they meet all technical requirements, regulatory compliances, and performance expectations. Our expertise is versed to meticulously assesses specifications for materials selection, application processes, and environmental considerations, providing comprehensive feedback and recommendations for improvement. By identifying potential issues early in the project lifecycle, we help clients avoid costly revisions and delays. Our goal is to ensure your coating system is designed for durability, efficiency, and long-term success, protecting your investment and enhancing the value of your assets.
Our Coating Failure Assessments service is designed to identify the root causes of coating degradation and failures, providing clients with actionable insights and solutions to prevent recurrence. Through a combination of on-site inspections, laboratory analysis, and our deep understanding of coating technologies, we diagnose issues such as adhesion loss, corrosion under insulation, blistering, environmental damage, etc. Our comprehensive approach not only pinpoints the specific factors contributing to the failure but also recommends corrective actions and improvements to extend the life of your coatings. By leveraging our expertise, clients can enhance the performance and resilience of their assets, ensuring they are protected against future challenges and maintain their operational integrity.
Our Maintenance Surveys service offers a proactive approach to preserving the integrity and performance of your coating systems. Through surveys, we assess the condition of your coatings and identify any signs of wear, damage, or potential failure, including the verification and assessment of the asset for design of coating’s maintenance. These surveys are essential for developing effective maintenance strategies that extend the life of your assets, reduce downtime, and minimize repair costs. INNOVA SERVICES & CONSULTING, LLC provides detailed reports outlining current conditions, risks, and tailored recommendations for maintenance or repair, ensuring your coatings continue to protect your assets effectively. With our Maintenance Surveys, clients gain peace of mind, knowing their investments are continually monitored and maintained to the highest standards.
Navigating the AMPP QP certification process is exited considering the profitability a company gains by receiving an AMPP QP endorsement. We encourage you to pursue this goal. But this process becomes challenging, our guidance will simplify your journey with the goal of ensuring your business meets and exceeds the rigorous standards set by the Association for Materials Protection and Performance (AMPP).
Our consultancy services provide comprehensive support across the spectrum of QP certifications, including QP1 for complex industrial and marine structures, QP2 for hazardous coatings removal, QP3 for shop painting, and more specialized certifications like QP5, QP6, QP7, QP8, and QP9, catering to various aspects of coating and lining inspection, contractor metallizing, and architectural coatings application. We also offer guidance for QS 1 certification, focusing on quality management systems. Our goal is to streamline the certification process, offering tailored advice, preparation assistance, and support to ensure your operations not only achieve but maintain the highest industry standards for quality, safety, and performance.
Achieving QP1 certification demonstrates your commitment to quality in the field application of coatings to complex industrial and marine structures. Our QP1 Certification Guidance service is designed to navigate you through the rigorous AMPP standards, ensuring your operations are equipped to meet the stringent requirements of this prestigious certification. We offer comprehensive support, from initial assessment of your current practices against QP1 criteria to detailed preparation for the audit process. INNOVA provides tailored training, procedural documentation, and on-site assistance to address any gaps, ensuring your workforce, safety practices, quality and management processes align with QP1 standards. With our expertise, your journey to QP1 certification will be seamless, enhancing your market position and affirming your dedication to excellence in industrial and marine coating applications.
If your goals are to specialize in the field removal of hazardous coatings, our QP2 Certification Guidance service equips your team with the knowledge and procedures necessary to safely and effectively handle these critical tasks. Achieving QP2 certification underscores your commitment to safety and environmental protection during the hazardous coatings removal process. INNOVA will guide you through every step, from evaluating your current safety protocols to enhancing them to meet the comprehensive AMPP standards required for QP2 certification. We offer detailed training on best practices, equipment handling, and emergency response procedures, ensuring your operations not only comply with but excel in health, safety, and environmental stewardship. With our support, obtaining QP2 certification becomes a streamlined process, highlighting your dedication to maintaining the highest safety standards in hazardous coating removal.
Our QP3 Certification Guidance service is tailored to assist coating contractors specializing in shop painting operations. Achieving QP3 certification demonstrates your facility’s adherence to the highest standards for performing coating work under controlled conditions. We guide you through the intricacies of the certification process, from initial assessment to compliance with AMPP’s stringent standards. Our comprehensive support encompasses everything from enhancing your facility’s infrastructure and equipment to optimizing quality control procedures, ensuring that your shop painting operations meet the rigorous criteria for QP3 certification. We also provide training for your staff on the latest industry practices and safety protocols, preparing your organization for the audit process and beyond. Partnering with us for QP3 certification positions your shop painting services at the forefront of the industry, showcasing a commitment to quality and excellence.
Our QP5 Accreditation Guidance service is specifically designed for coating and lining inspection companies aiming to achieve the esteemed QP5 accreditation. This accreditation affirms your company’s excellence and reliability in conducting coating and lining inspections according to the highest industry standards set by AMPP. We offer a comprehensive pathway to accreditation, guiding you through the detailed requirements and processes involved. From enhancing your inspection methodologies to ensuring your documentation and quality management systems are impeccable, our expert consultants are with you at every step. We focus on building your capabilities to meet the rigorous audit criteria, including staff qualifications, equipment calibration, and procedural integrity. Achieving QP5 accreditation with our guidance not only elevates your company’s status in the industry but also instills confidence in your clients about the quality and reliability of your inspection services.
Our QP6 Certification Guidance service caters to contractors specializing in metallizing, providing a structured approach to achieving QP6 certification. This certification is a testament to a contractor’s capability to perform metallizing work adhering to the stringent standards established by AMPP. Our comprehensive support covers every aspect of the certification process, from assessing your current metallizing practices against QP6 criteria to implementing the necessary improvements to meet these standards. We focus on enhancing your operational procedures, safety protocols, and quality control measures, and confirming that management is aligned to this procedure. Additionally, we provide training to ensure your team is proficient in the latest metallizing techniques and technologies. With our expert guidance, your journey to obtaining QP6 certification will be seamless, distinguishing your services in the field of contractor metallizing and affirming your commitment to quality and excellence.
Our QP7 Certification Guidance service is designed for painting contractors at the start of their journey towards achieving industry recognition. The QP7 certification acts as an introductory program, laying the foundation for contractors to establish best practices in safety, quality control, and project management in alignment with AMPP standards. This certification is an essential first step in demonstrating a commitment to professionalism and quality in painting services. Our guidance covers the essentials of the QP7 program, from understanding the criteria to preparing for the evaluation process. We offer targeted training and support to help your team develop the necessary skills and knowledge to meet the QP7 standards, including effective management practices, safety protocols, and quality assurance techniques. With our expert support, contractors can navigate the QP7 certification process confidently, setting the stage for future growth and success in the painting industry.
Our QP8 Certification Guidance service offers specialized support for contractors focused on the installation of polymer coatings and surfacing on concrete and other cementitious surfaces. Achieving QP8 certification signifies your proficiency in handling these specific types of projects, adhering to the rigorous quality and performance standards set by AMPP. Our approach is thorough and tailored, involving an assessment of your current practices and identifying areas for improvement to meet the QP8 requirements. We provide comprehensive guidance on the latest application techniques, safety protocols, and quality assurance measures necessary for certification. Training and support extend to ensuring your team is well-versed in the nuances of working with polymer materials on complex surfaces. With our assistance, your path to obtaining QP8 certification is clear, enhancing your reputation as a specialist in the industry and demonstrating a commitment to excellence in every project undertaken.
Our QS 1 Certification Guidance service is essential for companies aiming to establish or enhance their quality management systems in line with the prestigious QS 1 standards set by AMPP. This certification is a hallmark of excellence in quality management, reflecting a company’s dedication to continuous improvement, customer satisfaction, and operational efficiency. Our expert consultants offer a roadmap to certification, providing in-depth analysis of your current quality management practices and identifying areas for enhancement to meet the stringent QS 1 requirements. We assist in the development and implementation of robust quality management systems that not only comply with QS 1 standards but also align with your business objectives. Through training, documentation support, and process optimization, we guide your organization to QS 1 certification, ensuring your quality management system is a beacon of excellence in the industry.
"INNNOVA S&C brings a level of professionalism and expertise that’s rare in the industry. Their focus on reliability and innovation has consistently helped us protect and enhance our assets, making them an essential partner in our projects."
Jessica L Quality Assurance Lead
"With INNNOVA S&C, you get a partner who truly cares about your success. Their transparent approach and commitment to integrity have made a significant difference in our workflow and in the outcomes we achieve."
Lisa M Director of Operations
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce dolor arcu, commodo a mi non, pharetra gravida arcu. Praesent sit amet ante sed purus ullamcorper ullamcorper
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce dolor arcu, commodo a mi non, pharetra gravida arcu. Praesent sit amet ante sed purus ullamcorper ullamcorper
Read More
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce dolor arcu, commodo a mi non, pharetra gravida arcu. Praesent sit amet ante sed purus ullamcorper ullamcorper
Read More
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce dolor arcu, commodo a mi non, pharetra gravida arcu. Praesent sit amet ante sed purus ullamcorper ullamcorper
Read More